Perform Pre-Ride Check Your Motorcycle [Tips and Tricks]
Pilots walk about flight time (visual and mechanical aircraft inspection) each. You should be there, it is called pre-ride checks, it will take one minute, it could save your life. Here's a look at what.
Visually inspect the tires First, find too much damage, wear or nails in the tread or sidewall; check with a gauge at least once a week.
RIMS particularly in dirtbikes and dual sports, check spokes to make sure not destroyed. Run wrench or screwdriver in the spokes, which will send a tone, a loose spokes will be different.
Leakage your bike should not be leaking engine oil, coolant, oil or brake fluid.
Throttle should be smooth run, non-binding, and according to its own power off completely.
Pull the brake lever and the brake pedal is pressed, checking the operation.
Make sure the brake lights, tail lights, headlights and indicators of the right to work.
Check the engine oil level, if necessary add.
Fuel level is obvious.
Check the condition of the drive chain tension and lubrication.
Check the smooth operation of the clutch.
Check for loose cables control cables.
Bolts and nuts to see if there is vibration there is loose or fall off, especially after and dirtbike rides.
To give a light tug with any known problems nuts and bolts, especially those located in the exhaust system wrench in.
