How To Safely Drag Another Motorcycle [Tips and Tricks]
Motorcycles finished, and you and your friends? Or maybe you just ran out of gas a few miles before the fuel stop?First of all, get 12 feet to 20 feet (4-6 meters) of rope, tied together with a little fence-line or telephone line, or most importantly, a 1 inch (2.5 cm) wide flat nylon strap.
A method (picture above) remains towline muffled. In the lead bicycle, bonding lines once around the right footpeg (if drivechain is on the left). Rider firmly occupy the place of the line with his foot. Be towed rider does not use the opposite footpeg (left in our example), the same thing. If you pull out of the question, or the rider can easily let go.
Another method (below) to start the line tied to the lead bicycle frames as high as possible. Alternately, so that a "yes" and the end of each end of the line tied to the footpeg; fork should rest in the center position of the seat. Eventually leading back to the trailing cycling, and goes under the headlights, the centerline of the bicycle. Loose end wrapped around the handle bar once or twice, and by the left (clutch) handheld. The operation of the brake before pulling the rider normally, if he needs to be free, he can simply let go.
Either way, there are experienced drivers should be in trailing cycling, should make all slack out of the line; the trailing rider can run in the slack line and get it in front caught up. All braking should be done by the rear rider, and the lead rider should keep the speed down.
